Altusen KN1000 Manuel d'utilisateur télécharger pdf (Page 30)

KN1000 User Manual

Installation

To install the KN1000, refer to the installation diagrams on the following pages

(the numbers correspond to the numbers of the steps), and do the following:

1. Ground the unit using the grounding wire supplied with the KN1000

package.

2. Use the Console cable provided with this package to connect the

KN1000’s Console port, to the local console keyboard, monitor and

mouse.

Note: 1. The Console cable comes with connectors for both PS/2 and USB

mice and keyboards – use the ones appropriate for your

installation.

2. You can use any combination of keyboard and mouse

connections. For example, you can use a PS/2 keyboard with a

USB mouse.

3. Use the KVM cable provided with this package to connect the KN1000’s

PC/KVM port, to the keyboard, video and mouse ports of the server or

KVM switch that you are installing.

Note: The KN1000’s virtual media features may not be supported,

depending on the functionality of the cascaded KVM switch (see

Supported KVM Switches, page 173).

4. (Optional) If you want to use the virtual media function (see Virtual

Media, page 94), use the USB 2.0 Virtual Media Cable provided with this

package to connect a USB port on the server to the KN1000's Virtual

Media port.

5. (Optional) If you want to connect a PON device for remote power

management, plug its cable into the PON port.

6. (Optional) If you want to connect a serial console device or modem, plug

its cable into the RS-232 port.

7. Plug the LAN or WAN cable into the KN1000's LAN port.

8. Use the outlet power cord provided with the KN1000 package to connect

the KN1000’s Power Outlet to the attached server for power management.

9. Use the power cord from the server to connect the KN1000’s Power Inlet

to an AC power source.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 193 194

Pas de commentaire

Altusen KN1000 Manuel d'utilisateur Page 30