Altusen KN2108 Manuel d'utilisateur télécharger pdf (Page 35)

Chapter 2. Hardware Setup

Single Station Installation

In a Single Stage installation, there are no additional KVM switches cascaded

down from the KN2108 / KN2116. To set up a single stage installation, refer

to the installation diagrams starting on page 20 (the numbers in the diagram

correspond with the numbers of the instruction steps), and do the following:

1. Plug your Local Console’s keyboard, mouse, and monitor into the unit’s

Console Ports.

Note: The distance between the console and the KN2108 / KN2116 must

not exceed 20m.

2. Use Cat. 5 cable to connect any available KVM port to a KVM Adapter

Cable that is appropriate for the computer you are installing (see the table

on page 5 for details).

Note: The length of Cat 5 cable that links the KN2108 / KN2116 to the

KVM Adapter Cable must not exceed 40m.

3. Connect the KVM Adapter Cable to the computer.

Plug the connectors on the KVM Adapter Cable into the appropriate ports

of the computer you are installing. See KVM Adapter Installation

Diagrams, page 21 for connection examples.

4. Plug the cable from the LAN or WAN into the KN2108 / KN2116's RJ-45

socket.

5. Plug the female end of the power cord into the KN2108 / KN2116's Power

Socket; plug the male end into an AC power source.

6. Turn on the power to the KN2108 / KN2116.

After the KN2108 / KN2116 is powered up, you can turn on the computers.

kn2116_2006-12.book Page 19 Monday, January 29, 2007 3:24 PM

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 140 141

Pas de commentaire

Altusen KN2108 Manuel d'utilisateur Page 35